ਕੰਪਿਊਟਰ ਨੂੰ ਅਸੈਮਬਲ ਕਿਵੇਂ ਕੀਤਾ ਜਾਵੇ/ਅਸੈਮਬਲੀ: ਰੀਵਿਜ਼ਨਾਂ ਵਿਚ ਫ਼ਰਕ

ਸਮੱਗਰੀ ਮਿਟਾਈ ਸਮੱਗਰੀ ਜੋੜੀ
ਲਾਈਨ 39:
 
=== ਸੁਰੱਖਿਆ ਸਾਵਧਾਨੀਆਂ ===
# ਸਟੈਟਿਕ ਬਿਜਲੀ ਤੁਹਾਡੇ isਇਕੱਠੇ theਕੀਤੇ biggestਹੋਏ dangerਸਮਾਨ toਲਈ theਸਭ expensiveਤੋ partsਵੱਡਾ youਖਤਰਾ are about to assembleਹੈ, evenਇਹ aਬਣੇ tinyਹੋਏ shock,ਬਿਜਲਈ muchਸਰਕਟਾਂ tooਨੂੰ smallਮਿਟਾ forਸਕਦਾ youਹੈ to feel, can damage or ruin the delicate electronic traces, many times smaller than a human hair, that make up your CPU, RAM and other chips. It’s important to use your anti-static wrist strap to prevent damage to these components. Once you have the power supply installed in the case, clip the end of the wrist strap to the outside of the power supply. (Never plug your computer in while you are connected to it by a wrist strap.) This will ensure that you, the case and the power supply are all connected to a common ground, in other words there will be no inequality of charge that will allow a spark to jump from you to the case. It’s also helpful to have an anti-static mat to set the case and other components on.
# Nobody but you is at fault if you shock your components with static electricity. Make sure that you take the precautions in the previous paragraph to ground yourself from static electricity. (Note: if you really must work on a computer and have not got proper anti-static equipment, it is ''usually'' OK if you make sure that you do not move about much; are not wearing any static-prone clothing; handle components by the edges; and regularly (once a minute or so), touch a grounded object.). The ''case metal'' of your PC's power supply will usually be a suitable grounded object. As noted above, touch it every few minutes while you are working on your PC if you haven’t got a wrist strap.
#Turn off your computer and switch off your Power Supply at the wall before installing or removing any components - if power is flowing to components as they are installed or removed, they can be seriously damaged. In order to have a computer properly grounded, you need it plugged in at the wall but turned off at the power supply and at the wall. The neutral line may be earthed