ਕੰਪਿਊਟਰ ਨੂੰ ਅਸੈਮਬਲ ਕਿਵੇਂ ਕੀਤਾ ਜਾਵੇ/ਅਸੈਮਬਲੀ: ਰੀਵਿਜ਼ਨਾਂ ਵਿਚ ਫ਼ਰਕ

ਸਮੱਗਰੀ ਮਿਟਾਈ ਸਮੱਗਰੀ ਜੋੜੀ
No edit summary
ਲਾਈਨ 177:
If you install a floppy disk drive, the cable is very similar to the IDE cable, but with fewer wires, and a strange little twist in the middle. Floppy drives do not have master/slave configurations. The floppy disk connector is not usually keyed, making it all too easy to plug it in the wrong way! One wire in the IDE cable will be colored differently: this is pin 1. There is usually some indication on the floppy drive as to which side this is. The power plug for a floppy is 4 pins in a line, but rather smaller than the standard hard drive power connector. Plug the end of the cable with the twist into the floppy drive ("drive A:"). Plug the other end of the floppy ribbon cable into the motherboard. If you install a second floppy drives, plug the middle connector into "drive B:". The twist between drive A: (on the end) and drive B (in the middle) helps the computer distinguish between them.<ref>[http://www.pcguide.com/ref/fdd/confCable-c.html PC Guide]</ref>
 
=== ਹੋਰ konaiksnਕੁਨੈਕਸ਼ਨ ===
 
[[Image:Mainboard_pins.png|thumb|right|300px|Some cables are attached to pins on a board (e.g. motherboard or extension card)]]